Here's one using the JSD Chad Smith kit... Enjoy!
P.s. Cool Tip:
Send a snares amb or room mic (via the KPI) to an aux setup in the mixer; compress it, gate it, eq it to taste and bring it back into the mix alongside the snare
I've added another preset, adding a reverb send off the room mic's - adjust to taste. And I've cleared up the unused tom channel in the previous version, as it was a mistake.
Setting the Rm Rev channel to mono will add a lot of weight to the drums. Try it
... You might want to adjust the level and perhaps EQ the low-end too IMHO.
Please re-download. And comment
Updated the JSD Chad Pop Rev preset in the first attachment with the cym's from the kit. Enjoy!
Uploaded another version with an added FX channel that I'd personally use for creative fills during a break section returning to a verse, or kicking into a chorus.
Automate the on/off switch of the individual effects on that channel, and solo the FX channel too (at the same time) as only the ambient mics and additional room reverb are sent there. You could also try adding a delay after this in your DAW, and mess with the drive control to add more grit.
P.s. As the ambient's are sent direct to the Fill Fx channel rather than via a send, don't mute this track! I did it this way to save automating many a send on/off to achieve the same result. Hope that makes sense...???