Strobe Pitch Modulation (Vibrato) - Fxpansion.com

Forum

FXpansion Forum

Strobe Pitch Modulation (Vibrato)

Support for DCAM: Synth Squad

Moderators: Drew_fx, clare_fx, SKoT_FX, Steve_FX, Mully_FX, mayur_FX, Angus_FX, Andreas_FX, Rory_FX, Rhi_FX, Paul_fx, Moderators

neyprod
Posts: 5
Joined: Sun Mar 18, 2012 5:09 pm

Strobe Pitch Modulation (Vibrato)

Postby neyprod » Thu Sep 04, 2014 6:55 pm

So it's easy to do this on NI Massive, you drag an LFO to the Oscillator's pitch and you get a vibrato... easy.
Not so simple on Strobe... i tried Tying an LFO to the "FINE" knob under the main pitch but it just doesn't get the same effect.

Kickflip
Posts: 797
Joined: Sat Dec 30, 2006 1:24 pm

Postby Kickflip » Thu Sep 04, 2014 9:45 pm

In one of the Modulation slots, you just need to select Perf1+on the top, then apply that modulation to the LFO Mod knob next to the Oscillator pitch. Then the amount of LFO modulation is determined by the Mod Wheel, which is Perf 1 by default.
Hackintosh Q6600 : 4Gb DDR2 : OSX Leopard 10.5.8 : Logic 9.1.5 : Mackie Onyx Satellite : UAD1 x 2 : Akai MPD32

Music
http://www.soundcloud.com/kickflip

Circuit Bent Madness
http://www.bogus-noise.co.uk

PaulSC
Posts: 20
Joined: Thu Dec 17, 2009 8:16 am

Postby PaulSC » Sun Sep 07, 2014 9:40 pm

Strobe's oscillator panel has a dedicated Lfo mod depth (vibrato) knob…

Image

so all you have to do is:

1. Shift-drag the Lfo mod depth knob upwards to a suitable small value, like 0.3.

2. Adjust the Lfo speed, shape, and other settings to create the vibrato effect you want.

A simple Strobe preset is attached, have a look. You didn't ask for modwheel control of the vibrato, but if you want it, Kickflip's post tells you how to get it.

Incidentally, another way to set up vibrato in Massive is to use the dedicated vibrato controls in the OSC tab…

Image
Attachments
Simple vibrato.Strobe.zip
(1.13 KiB) Downloaded 285 times

neyprod
Posts: 5
Joined: Sun Mar 18, 2012 5:09 pm

Re: Strobe Pitch Modulation (Vibrato)

Postby neyprod » Sat Aug 10, 2019 5:59 pm

Thank you both!
and for the patch as well.


Return to “DCAM: Synth Squad”

Who is online

Users browsing this forum: No registered users and 1 guest