Feature Requests

zvenx · Postby **zvenx** » Wed Feb 27, 2013 2:29 pm

Played with Bloom yesterday and once I starting making my own presets, I loved it and bought it.

Just wished the forward/reverse was modulatable...and also there was a mix always at 100% option.

And of course vst3 for cubendo side chaining....(yes I know there is a work around)

but really nice job on this one fxpansion.

rsp

Postby **Rory_FX** » Fri Mar 01, 2013 4:36 pm

Fwd/rev can be automated via Graph 3.

Mix lock is coming in next update. We had to pull it from the initial release at the last minute due to a problem, but that's been fixed already in-house.

VST3 - sorry, probably won't happen.

zvenx · Postby **zvenx** » Fri Mar 01, 2013 4:39 pm

thanks one of the fx ppl responded on kvr.....was it you?

thanks
rsp

Postby **Rory_FX** » Fri Mar 01, 2013 4:54 pm

No that was probably Drew.

zvenx · Postby **zvenx** » Fri Mar 01, 2013 5:13 pm

thanks anyway.
will resist the urge to debate the whole vst3 thing :-)

rsp

pedal_fiend · Postby **pedal_fiend** » Wed Mar 13, 2013 1:08 pm

hi there,

been playing with the demo, lots of fun but I have a couple of questions,..

I do like the variable/morphing LFO's but how do you get a rising ramp ?

You can get really creative with the sequencers and mod routing, but it would be really useful on Seq1 when Delay is selected to have and 'Off' option in the timing selection,.. so you can seq between bar, 1/4, off, 1/16, etc, rather than having to select a timing where none is required.

Kickflip · Postby **Kickflip** » Thu Mar 14, 2013 1:16 am

If you set the Transmod slot to bipolar you can add modulation negatively instead of positively and get the same result but with a rising instead of a falling sawtooth. I would personally love to be able to select a rising ramp from the LFO itself though! Perhaps an 'Invert Phase' button at the top, next to the 'Beats' checkbox would be a good solution?

Postby **Rory_FX** » Thu Mar 14, 2013 10:01 am

sarah_bellum wrote:...it would be really useful on Seq1 when Delay is selected to have and 'Off' option in the timing selection,.. so you can seq between bar, 1/4, off, 1/16, etc, rather than having to select a timing where none is required.

What would Off mean exactly? 0ms delay? Whatever the delay knob happened to be set to before the graph "took control"? The previous graph step value?

pedal_fiend · Postby **pedal_fiend** » Thu Mar 14, 2013 4:16 pm

Rory_FX wrote:
sarah_bellum wrote:...it would be really useful on Seq1 when Delay is selected to have and 'Off' option in the timing selection,.. so you can seq between bar, 1/4, off, 1/16, etc, rather than having to select a timing where none is required.

What would Off mean exactly? 0ms delay? Whatever the delay knob happened to be set to before the graph "took control"? The previous graph step value?

just to be able to sequence the delay,.. e.g- if you have a percussion hit on the 13th beat, set the 13th step to whatever timing and the other steps 'off' so delay is only applied to the percussion - like XILS-labs Le Masque delay. I know I could automate this from the Daw, as with any delay, but so could most of the seq functions. It would still be a quick and useful function to have though.

Postby **Rory_FX** » Thu Mar 14, 2013 4:19 pm

Ah ok, you can do that by automating the Input Gain with one of the other graphs

fxp123 · Postby **fxp123** » Sat Sep 07, 2013 3:38 am

I'm really getting into Bloom's possibilities. What a flexible machine!

I have one FR (for now!): it would be nice to be able to have a Mono input mode (allowing selection of Left, Right, or Mono Mix) at the input of the effect and put a modulateable Pan control after the effect input volume and before the Diff or Delay inputs. This would allow to "seed" the effect in very interesting ways.

That's it!

Forum

FXpansion Forum